Engineering News

Engineering News

Engineering News (75)

Apergy Middle East LLC representative as Guest Lecturer to Mechanical Students

Student Development Committee of Mechanical Engineering Section held a guest lecture on February 10, 2019 about “Heat Treatment Processes”- a series of operations that change the properties of materials for the desired use and applications. Mr. Khaldoon Hamid Al Noubi, Plant Operator- Apergy Middle East LLC, Salalah was the speaker.

He explained various heat treatment processes applied by the company to improve quality and serviceability of materials. The lecture served as enrichment of knowledge gained in the classroom.

Read more...

Omani Entrepreneur Inspires Students to Use Innovative Ideas in their Projects

The Chemical Engineering Diploma students listened to an inspirational lecture about “Application of Innovative Ideas in Project”. The lecture was delivered on February 5, 2019 by Ms. Atheer Musallam Tabook, an Omani entrepreneur and business owner of Lubaniah Skin Care Company.

The guest lecturer shared her own experiences while studying and doing project in University of Michigan, USA. She discussed the significance and application of Oman Frankincense as raw materials in soap manufacturing that won her award as best manufacturing business idea.

Students were encouraged by the speaker to develop their project ideas, knowledge, and skills into real life business in the future.

Read more...

Interactive Session on Construction Project Management

Civil and Architecture Engineering Section held an interesting session on January 29, 2019 delivered by Engr. Mohammed Masoud Al Mashani, Project Director-ONEIC (SAOG) for the section’s staff and students.

The speaker tackled Construction Project Management (CPM) and explained the significance of proper planning before starting any project. Included in the discussion are the various steps involved in CPM as well as ways of involving stakeholders. The speaker interacted closely with the participants during the session.

Read more...

“MIMOSA” Workshop

Engineering Department - Timetable Committee headed by Dr. R. Rajashekaran conducted workshop on “Mimosa” – a course planning and scheduling software held on January 29, 2019 in ELEC-12L.

Dr. Nurul Hasan Shaikh, Lecturer in Electrical section explained about the applications of the software in preparing timetable such as accuracy in scheduling, thus avoiding clashes and overlapping.

Timetable Committee members of Engineering, IT, Business and ELC Departments participated in the workshop. Each participant was given actual training of preparing timetable using the software.

Read more...

Student Leadership Training, Seminar and Election of Officers

The Student Development Committee(SDC) of Engineering Department headed by Arch. Arwa Al Ghassani and Engr. Gerardo C. Laya conducted a Student Leadership training ,seminar and election of officers on Tuesday, 05 Feb. 2019 at ELEC 13L. The seminar stressed on leadership skills and other qualities that student leaders should acquire including active participation in planning, organizing and conducting academic and extra-curricular activities of the department.

Before the election, candidates discussed about their plans if elected as officers, then voting took place in which the following students were chosen for the Engineering Students’ Society (ESS):

PresidentAyham Nabil Al Ghassani (Electrical Engg)
Vice President for External AffairsHumaid Hamood Al Fure (Civil Engg)
Vice President-President for Internal AffairsAiman Mohamd Saleh(Elec. Eng’g)
SecretaryAaisha Mohammed Ahmed Al Mashiki(Chem. Eng’g)
TreasurerMohammed Khalfan Al Hashmi(Civil Eng’g)
Asst. TreasurerOsama Hussein Al Yafei(Mech. Eng’g
AuditorMajid Khalid Al Aamri(Mech. Eng’g)
Asst. AuditorMohammed Ahmed Al Mashani (Chem. Eng’g)

Student Development Committee members will serve as advisers for the society.

Read more...

How to Write Exams effectively and Ways of Improving Self Confidence seminar conducted by Student Development Committee of Engineering Department

In response to the needs survey conducted among students, the Student Development Committee of Engineering Department conducted a seminar on How to Write Exams Effectively & Improving Self-Confidence last 06 Feb. 2019 at ELEC 12L. The speaker was Engr. Syed Muhammad Iqbal, faculty member of Civil Engineering & Architecture section. He emphasized on the different factors affecting students’ performance in examinations such as study skills, sleep time, language barriers, absences, excessive use of gadgets, etc., and how to overcome these factors.

Read more...

Complementary Workshops and Seminars conducted by Student Development Committee of Engineering Department in Collaboration with Electrical & Electronics Engineering Section

In line with the goals of the Engineering Department in enhancing the academic skills of students, the Student Development Committee in collaboration with Electrical & Electronics Engineering section conducted various seminars such as:

(i) Applications of GNU Octave Simulation Software in Control Engineering by Engr. Syed Fairose on February 6, 2019. The training was attended by Advanced Diploma and BTech students from Electrical and Mechanical Sections.

(ii) Project Design Preparation & Presentation by Engr. Arun Balaji on January 29, 2019. Students from Electrical section taking Final Year Projects attended.

(iii) Applications of Power World Simulation Software in Power Systems by Engr. Jonathan Talosig was an enrichment workshop for students taking course in Numerical Methods

Read more...

Engineering Staff Gathering “TAJDID ”

Engineering Department organized a Staff Gathering - “TAJDID” for all department staff on January 9, 2019 held at the SCT-Multipurpose Hall. This gathering aimed to strengthen camaraderie and teamwork among the staff.

Various fun activities and games that fostered teamwork and bonding were enjoyed by everyone. Cumulative scoring was done per section and trophy was awarded to Mechanical Section who emerged as winner. The event was hosted by Mr. Haris Bin Arif and Ms. Jyothi Gidavir.

The gathering concluded with a sumptuous lunch shared and enjoyed by everyone. Complimentary souvenirs were distributed to all participants.

Read more...

Finite Element Analysis using Solidworks 2015

On October 30, 2018, Mechanical Engineering Section conducted a seminar on “Finite Element Analysis using Solidworks 2015”.

SOLIDWORKS software is a powerful CAD/CAM/CAE package used widely for product development solutions. Using the software helps industries reduce manufacturing cost, improve product quality and increase production.

Read more...

Industry Visit to ABI SHOWATECH OMAN LLC (FZC), Salalah

Mechanical Engineering Section –Diploma Second Year students visited ABI SHOWATECH OMAN LLC (FZC), Salalah Company on 8th October, 2018. This experience was a good opportunity for students to understand the CNC programming, CNC machining centers and quality control instruments like CMM (co-ordinate measuring machines), checking geometrical tolerances, surface finish per design specification and other related procedures used by the company.

Read more...
Subscribe to this RSS feed

Log in